▣  PRODUCT

 

• Interzinc 52 (Epoxy Zinc-Rich)

 

​

▣ PRODUCT DESCRIPTION

 

• A two component, metallic zinc rich epoxy primer which complies with the composition and performance requirements of SSPC Paint 20.

​

​

▣ INTENDED USES

 

• As a high performance primer to give maximum protection as part of any anti-corrosive coating system for aggressive environments including those found on offshore structures, petrochemical facilities, pulp and paper plants, bridges and power plants.

• Interzinc 52 has been designed to provide excellent corrosion resistance in both maintenance and new construction situations.

 

​

▣  PRACTICAL INFORMATION FOR INTERZINC 52

​

• ​Color : Blue, Gray, Green

• Volume Solids : 59% ± 2%

• Typical Thickness : 2-3 mils (50-75 microns) dry equivalent to 3.4-5.1 mils (85-127 microns) wet

• Method of Application : Airless Spray, Air Spray, Brush

​

​

▣ Drying Time

​

• Base Temperature : 77°F (25°C)

• Touch Dry : 75 minutes

• Hard Dry : 4 hours

• Overcoating Interval with recommended topcoats

       - ​Minimum : 3 hours

       - Maximum : Extended

​

​

▣ SURFACE PREPARATION

 

• Oil or grease should be removed in accordance with SSPC-SP1 solvent cleaning.

 

​

 ▣ APPLICATION

​

• Mix Ratio : 4 part(s) : 1 part(s) by volume

​

• Airless Spray - Recommended

      : Tip Range 17-21 thou (0.43-0.53 mm)
      : Total output fluid pressure at spray tip not less than

        2503 psi (176 kg/cm²)

​

• Air Spray (Pressure Pot) - Recommended

      : Gun DeVilbiss MBC or JGA
      : Air Cap 704 or 765
      : Fluid Tip E

​

• Brush : Suitable - Small areas only

 

• Roller : Not recommended

 

• Thinner : International GTA220

                    (International GTA415)

 

​

▣ SYSTEMS COMPATIBILITY

​

• Interzinc 52 is designed for application to correctly prepared steel. It is possible to apply over approved prefabrication primers. Details of these can be obtained from International Protective Coatings.

​​

• Recommended topcoats are:

        Intercure 200            InterH2O 410

        Intercure 420            Interseal 670HS

        Interfine 629HS        Interthane 990

        Intergard 251            Interzone 1000

        Intergard 269            Interzone 505

        Intergard 475HS       Interzone 954

        Intergard 740

 

​

▣ STORAGE

​

• 12 months minimum at 25°C (77°F).

• Subject to re-inspection thereafter. Store in dry, shaded conditions away from sources of heat and ignition.